Model: CPS
Rubber covering tubes
(sleeves) have been used in the circus for over 15 years on Chinese poles. Nowadays
in the circus we use permanently vulcanized rubber on our poles, as the end
result is better. But, for some customers, rubber sleeves can be a great option.Features:· ..
432.08 $CAD
_600px-250x250h.JPG "Trapeze/ Swinging Trapeze-Cloud Swing/ Bearing/ Kit")
Model: BE30
This kit contains a pair of bearings with double swivel, meaning it will
allow you to swing forward and back, while adjusting to the angle of your
ropes. It's designed to accommodate any rope angle without putting extra load
on the bearings, which will increase the bearings' longevity. The kit ca..
1,220.80 $CAD
4 - 8 Weeks
Model: CHINESEPOLESLEEVESTDCUSTOMDI
Rubber covering tubes
(sleeves) have been used in the circus for over 15 years on Chinese poles. Nowadays
in the circus we use permanently vulcanized rubber on our poles, as the end
result is better. But, for some customers, rubber sleeves can be a great option.
Features:
·       Â
Rubber thicknes..
482.83 $CAD
Model: JW-8W18L90-Modified
Modified Spring Plunger for Chinese Pole Rotating Kit..
45.96 $CAD
_275px-250x250w.jpg "Rigging Cables | 7X19 Aircraft | 3/16'' | Steel | 20'")
Model: RC-3/1620B
These cables are small but strong and selected for the right Working Load.BLACK color, so it's not so apparent on stage.Loop at both endsTechnical Specifications:Diameter: 3/16'' / 4.75 mm Length: 20 feet / 6.1 metersUltimate load: 4200 LBS / 1910 KGRecommended working load: 840 Lbs / 382 KGWeight: ..
22.92 $CAD
Model: SP03
Beam anchor plate*NOTE: The length bolts shipped with your beam will be based on the width of the beam selected from the option. The bolts will measure 1.5 inches more then the length of your beam. If your beam width is not in the options to the right, please round up to the closest length in t..
75.44 $CAD
Model: APRB-10
10 Replacement bolts for CircusConcepts Aerial Poles.These bolts are for CircusConcepts Aerial Pole Models N60A1000-12PI and N60A1000-16PIItems Included:10 Bolts..
42.56 $CAD
Model: RP01
This Beam Clamp is designed to be rigged on a beam to add an attachment point.Your Beam must be compatible.*Please check the image explaining the distancesWith space in the center: Minimum 1/2inch to max 2-1/2''Height of beam: Min 1-1/2" to max 3-1/2" (Higher beams possible, just request longer bolt..
137.17 $CAD
-250x250w.JPG "Freestanding Aerial Rig Structure | ACHILLE Tripod | Trapeze Spreader Bar Attachment")
Model: TAA120
Spread bar AttachmentThis Spreader Bar is specially design to attach to the Achille Tripod, allow you to rig a fix or dance trapeze bar to the tripod it is also perfect for bungees, loop ropes or loop tissue. This bar has two rigging points with the same approved load capacity as the Ach..
198.89 $CAD
Model: MT60
This pole head adapter is an Eyebolt Adapter made to put on top of your pole so that you can use it as an aerial Pole. This adapter can be put alone on top of the pole, but also in COMBINATION with the MT03 Standard Pole head, so you can do part of the act rigged, and part of the act as aerial. This..
176.94 $CAD
Model: TR90
Protect your Achilles with these Aluminum Stakes, made to keep your Achilles Tripod anchored to the ground and prevent it from tipping over in high winds. *Sold individually (3 units recommended) Technical Specifications:Made completely of AluminumLength: 30 InchesRod: 3/4 ''Round he..
41.15 $CAD
Model: MC95
Pole Base for PRO STATIC POLES only (not for aerial poles) This pole base is a rounded bottom adapter for the bottom of your pole so that you can use it as a mix with an Aerial Pole. The rounded adapter comes with a small wooden Chinese pole base. This base has a rubber glued under it to ensure..
351.83 $CAD